ELECTRICAL ENGINEERING

This range covers experimental panels, accessories and complete kits. Demonstrations and experiments can be carried out in
· Fundamentals of electricalengineering
· Wiring circuits
· Contactor Controls

The experimental panels are designed for insertion into experimental frames. Dimensions of the panels:-
Height : 297mm
Width : 130mm or wider by whole number multiples of 65mm.

The instruction modules in the following selection table permit experiments to be carried out in any desired arrangement. We recommend that the saaembly kits be used if the experiments are to be conducted in accordance with
our experimental manuals.

 
 
more products for
this category
 
 
ELECTRICAL

This product line comprises experimental panels, plug-in modules, plug-in components and compact training units.

Plug-in components are inserted into universal mounting panels and sometimes – for completing a circuit – also into experimental panels. Using the instruction modules listed in the following selection tables, experiments can be made in any arrangement desired. If experiments are to be carried out in line with our instructions, we recommend using our assembly kits.

 
more products for
this category
   
 
POWER ELECTRONIC

If you can analyze problems systematically and understand interrelationships, you'll have no difficulty in coping with future developments – in any field of technology. As your partner for training systems, we can provide you with the technical equipment you require for this purpose including comprehensive instruction manuals and training documentation. Systematic analysis in the field of power electronics means learning about basic circuits, such as DC chopper controllers and AC power controllers, through specially designed measuring exercises and understanding the operating principle of devices and the real behavior of components.

Our task should be to help you to answer these and similar questions on a practical basis and to provide suitable experimental equipment for scientific studies. Our training system gives you almost unlimited freedom, i.e. you can pick and choose elements to create your own “personal” training strategy. If you attach particular importance to training with a supply voltage of 230/440 V, then you will want to use either our modular panel system or our specially designed “didactic” industrial equipment. If you require an extra-low supply voltage for training purposes and if criteria such as mobility, tuition outside proper training laboratories and lack of space need to be taken into account, then you can choose between a compact panel and a modular “case” system.

 
 
more products for
this category
   
 
COMMUNICATION

The communication training system SIEMENS HICOM includes an actual communication platform (or PABX) for small and medium companies. It is an ISDN "Communication Server" that handles telephone calls as well as fax and data calls and the access to the Internet; guaranteeing the ISDN lines towards the public network to be used best. The training unit can also be operated without ISDN connection to the public telephone systems (isolated operation).

One set is suitable for max. 2 students and adapted to the curriculum for vocational training schools and technical institutes in the field of communication. The SIEMENS HICOM Trainer is much more than a trainer for a „small PABX“. The configuration software which is included in the trainingssystem is suitable for the whole range of HICOM 150 PABX. This means that the same software is used for communication platforms up to 274 extensions.

This may sound complicated for beginners, but an easy getting started manual with screenshots of the necessary settings or the possbility to programm the PABX by telephone leads the student to successfull experiments.

 
 
more products for
this category
   
 
MEASURING INSTRUMENTS

Related to our Training Systems for vocational training and higher education we offer reliable and accurate test and measuring eqipment. Mainly produced under ISO 9000 conditions, they guarantee a high quality standard and longlife use.

3 years warranty are obligatory.
Calibration acc. to ISO 9000 we offer as extra service.

 
 
more products for
this category
   
 
POWER SUPPLIES

Power supply unit for DC and AC Voltages
&
Portable universal power supply unit

 
 
 
more products for
this category
   
 
BUILDING MANAGEMENT SYSTEM

In general

The instabus EIB is a distributed data bus system for flexible service management in functional and residential buildings. Every storey, every room is individually supplied according to its requirements and conditions with the optimum electrical power for the respective time of day. This new technology revolutionizes electrical installation, is easy to comprehend and
easy to implement. It saves time because planning is PC-based and much fewer leads must be laid during installation. As all components are optimally matched to one another, buildings with an instabus EIB installation consume considerably fewer resources and thus work more economically as traditional systems. What is more, the system can be quickly and easily adapted when the layout of the room changes by simply reassigning devices and components.

 
 
more products for
this category
   
 
VDE 0100 PROTECTION SCHEMES

Our Training Systems program “Protection Schemes to VDE 0100” is suitable to show the design, principle of operation and performance of the circuits protecting against indirect contact with the live parts specified in DIN VDE 0100 Part 410. The limits of the effectiveness of the individual protective measures are to be determined by measurements to ensure that the trainers understand the regulations specified. Protection schemes are continuos to be adapted to the newest technology, there fore we have enhanced our resp. training systems. For our experimental-panel system and the demonstration board we use commercially available test gear. VDE 0100 Training System is usable for testing protection schemes in electrical systems. By alternating the earth-resistors faults can be simulated and located. The results are useful to ensure the practical work of the trainees.

 
 
more products for
this category
   
 
RADIO & TV TECHNOLOGY

All Radio- and Television Training Systems are especially designed for basic and advanced training in the field of television and radio engineering. They allow to show and work on
fundamental priciples and operating behavior to be demonstated and explained. Realistic exercises show how to various faults can be pinpointed and rectified.

The models take the form of fully operational television and radio sets as well as antenna systems with high picture and sound quality, allowing them to be used for audio-visual training purposes as well. for example A big variety of different training systems are available, please contact us for further information.

 
 
more products for
this category
   
 
REFRIGERATION & AIR-CONDITIONING

This new developed experimental station for refrigeration and air-conditioning
training permits refrigeration and air-conditioning tests to be conducted in the normal cooling, air-conditioning and deep-freeze ranges, the electrical circuits to be set up, and measurements to be taken.
A test group should comprise not more than 2-3 trainees for each experimental
station.

 
 
more products for
this category
   
 
ELECTRIC MACHINES & DRIVE CONTROL (ELECTRIC MACHINES 200W, 1000W & 5kW)

If you can analyze problems systematically and understand interrelation-ships, you'll have no difficulty in coping with future developments - in any field of technology. As your partner for training systems, we can provide you with the technical equipment you require for this pu pose including the necessary know-how in the form of comprehensive instruction manuals, training documentation and extensive configuring and design aids. Systematic analysis in the field of electrical machines means learning about the behavior of electrical machines through exact measuring exercises and evaluation of the characteristics recorded. This includes comprehension of basic electric circuits such as star-delta connections, stator-resistance starting circuits etc. and the ability to connect these with the specific problems of the individual machine types.

 
 
more products for
this category
   
 
ELECTRIC MACHINES & DRIVE CONTROL (ELECTRIC MACHINES - CUTAWAY MODELS)

· Development and production of didactic training systems
· Teachware and documentation
· Project engineering of complete lab's incl. furniture and lab equipment
· Quotations on customer's demand
· Installation, commissioning and training at site

 
 
more products for
this category
   
 
AUTOMATION ENGINEERING (LOGO!)

LOGO! Set Training module The LOGO! Set training module simplifies the familiarization with the world of the universal and innovative Logic module LOGO! It includes all the necessary items for your training with your students of the 8 basic- and 22 special functions as well.

Innovative switching and control: LOGO!
Up to 8 basic functions and 21 special functions can be combined with each other up to 56 times in LOGO! The following maximum numbers are optionally possible:
• 16 timer functions
• 24 counter functions
• 8 time switches
• 42 pulse relays
• 42 latching relays
• Functions for analog value processing and message texts

You can forget about individual components like time switches, timer relays, counters and auxiliary contactors – they are all included in LOGO!

 
 
more products for
this category
   
 
AUTOMATION ENGINEERING (PROCESS-SIMULATION 95)

The aim of the PLC training is to train users on practical aspects. A prerequisite is the systematic, didactic structure of the course. Thus, the necessary knowledge and skills are taught

• With reference to practical applications
• On a time-saving basis
• Effectively

Practical exercises and learning with PROSIM on simulated procedures are tailored to these requirements.

 
 
more products for
this category
   
 
AUTOMATION ENGINEERING (PROCESS-SIMULATION 95)

The aim of the PLC training is to train users on practical aspects. A prerequisite is the systematic, didactic structure of the course. Thus, the necessary knowledge and skills are taught

• With reference to practical applications
• On a time-saving basis
• Effectively

Practical exercises and learning with PROSIM on simulated procedures are tailored to these requirements.

 
 
more products for
this category
   
 
AUTOMATION ENGINEERING (SIMATIC S7)

The aim of the new IEC 1131 standard is to attain a worldwide unified system in the field of PLC technology. The programming languages are standardized in part 3. The standard encompasses the ladder diagram (LAD), function block language (FBL), sequence language (SL), statement list (STL), and structured text (ST). PLC systems are an integral component of automation today. SIMATIC S7 has taken the lead by offering a basic system for the entire field of automation. SIMATIC S7 is the platform for

• PLC
• Man-machine interface
• Industrial networking
• Process control engineering
• Automation computers
• Measurement and control
• DP applications

 
 
more products for
this category
   
 
AUTOMATION ENGINEERING (SIMATIC S7)

Closed-loop control equipment is of central significance covering many technical disciplines. This applies particularly in mechanical and electrical engineering, in production and process technology, in plant and systems technology where such equipment is indispensable.

In the automation field, important optimization tasks would be quite impossible to solve without closedloop control technology. In line with its increasing importance, closed-loop control has become a basic subject in professional training and further education for many
professions.

In the newly formulated training curricula, this technology has been given a role covering a number of subjects in the syllabuses for training in industry and the crafts.

 
 
more products for
this category